We are offering textile Stenter Finishing services to our customers.
Stentering service is a mechanical finishing process of textile. It is done for the stretching of fabric by the stenter machine. In other words we can say stentering is done for gripping the edges of a moving web to support the web during heating and stretching operations. Heat setting is done by the stenter for lycra fabric, synthetic and blended fabric. … Fabric is dried by the stentering process. Shrinkage property of the fabric is controlled. Curing treatment for resin, water repellent fabric is done by the stenter. A machine or apparatus for stretching or stentering fabrics. The purpose of the stenter machine is to bringing the length and width to pre determine dimensions and also for heat setting and it is used for applying finishing chemicals and also shade variation is adjusted. The main function of the stenter is to stretch the fabric widthwise and to recover the uniform width.
Functions of Stenter Machines:
Heat setting is done by the stenter for lycra fabric, synthetic and blended fabric. Width of the fabric is controlled by the stenter. Finishing chemical apply on fabric by the stenter. Loop of the knit fabric is controlled. Moisture of the fabric is controlled by the stenter. Spirility controlled by the stenter. GSM of the fabric is controlled by stenter. Fabric is dried by the stentering process. Shrinkage property of the fabric is controlled. Curing treatment for resin, water repellent fabric is done by the stenter.
Components of Stenter Machine:
Paders Weft straightner (Mahlo) Burners 10 Heat recovery Attraction rollers Circulating fans 10,8 Exhaust fans 2 Winder 2 Clips Pins I.R Cooling drums 2
Working Procedure of Stenter Machine: The fabric is collected from the batcher to the scray and then it is passed through the padders where the finishes are applied and some times shade variation is corrected.The fabric is entered into the mahlo (weft straigtner) the function of the mahlo is to set the bow and also weave of the fabric is griped by the clips and pins are also provided but the pins has a disadvantage that they pins make holes at the selvedge but the stretchning of the pins are greater than the clips.these clips and pins are joined to endless chain.there are 8 to 10 chambers provided on the machine each chamber contains a burner and filters are provided to separate dust from air.the circulating fans blow air from the base to the upper side and exhaust fans sucks all the hot air within the chambers .We provide this service on all types of fabrics. The cost for this service varies from fabric to fabric and the maximum width of the fabric should be “66”inches.
We are only looking for queries from Mumbai and around Maharashtra.